Simulation of CNC milling on chain adjuster design using fusion 360 to enhance process time efficiency
DOI:
https://doi.org/10.35194/jmtsi.v10i1.5642Keywords:
CNC Milling Machine, Fusion 360, Simulation, Machining Parameters, Chain adjusterAbstract
The digitalization of physical fluid phenomena in pump performance teaching media remains a significant challenge in the development of online and laboratory-based learning tools. This study aims to develop a Human Machine Interface (HMI) based device as a teaching aid to support pump performance practicum for students. The system is designed to provide informative, real time, and responsive visualizations associated with valve opening adjustments and motor shaft rotation. The development process follows the waterfall model, which includes requirement analysis, system design, implementation, and verification. The resulting HMI interface dashboard demonstrates interactive capabilities, enabling users to monitor and control system parameters effectively. The system responds dynamically to operational changes and displays variations in key parameters such as pressure and fluid flow rate in real time. The implementation of this HMI based learning media is expected to enhance students’ understanding of fundamental pump performance concepts by providing a more engaging and intuitive learning experience. Through dynamic visualization and interactive control features, the system bridges the gap between theoretical knowledge and practical application during laboratory sessions.
References
[1] A. Nugraha, F. R. T. Saputro, and A. Kurniawan, “Optimasi parameter strategi pemotongan 2D Contour CNC milling terhadap kekasaran permukaan dan kebulatan dengan Metode Taguchi dan Anova,” Al Jazari J. Ilm. Tek. Mesin, vol. 8, no. 1, pp. 1–5, 2023.
[2] D. I. Permana and Y. Yayat, "Optimasi parameter permesinan terhadap tingkat kekasaran permukaan aluminium proses pembubutan dengan metode Taguchi," METAL: Jurnal Sistem Mekanik dan Termal, vol. 3, no. 1, pp. 10–16, 2019
[3] S. Yulistian Pratama et al., “Analisis putaran spindel terhadap waktu dan biaya produksi proses reservoir cover aluminium 6061 menggunakan CNC TU-3A,” vol. 2, no. 2, pp. 115–129, 2024.
[4] A. D. Ramadan, I. G. N. K. Yudhyadi, and T. Rachmanto, “Optimize of machining parameters toward the process time of programming CNC milling based with CAD/CAM,” Jurnal Teknik Mesin, vol. 1, no. 1, pp. 18–21, 2016.
[5] M. Aziz and R. Saraswati, “Optimalisasi parameter mesin CNC Milling 3 axis terhadap waktu produksi dengan menggunakan response surface methodology,” Formosa J. Appl. Sci., vol. 1, no. 4, pp. 293–304, 2022.
[6] Ulinuha C.& Widyanto S.A., “Peningkatan kemampuan sistem operasi mesin milling CNC tainer dengan mengadaptasi luaran perangkat lunak Mastercam,” Jurnal Teknik Mesin, vol. 5, no. 1, pp. 25–31, 2017.
[7] H. Yudiono, “Pengaruh variasi baja terhadap keausan end mill cutter HSS pada proses permesinan CNC milling,” J. Tek. Mesin Indones., vol. 15, no. 2, pp. 21–24, 2020.
[8] C. W. Hung, W. T. Li, W. L. Mao, and P. C. Lee, “Design of a chamfering tool diagnosis system using autoencoder learning method,” Energies, vol. 12, no. 19, 2019, doi: 10.3390/en12193708.
[9] M. Diki et al., “Optimasi Proses Machining Mesin Cnc Milling Untuk Front Channel Dan Rear Channel Pada Alat Surface Condensor,” J. ALMIKANIKA, vol. 2, no. 3, pp. 95–105, 2020.
[10] T. A. Setiawan, A. I. Juniani, D. A. Purnomo, N. Rinanto, and H. N. Faruq, “How To Utilize Autodesk Fusion 360 That Reinforces Product Redesign Simulation?,” JISO J. Ind. Syst. Optim., vol. 6, no. 1, p. 48, 2023.
[11] E. Prianto and H. S. Pramono, "Proses permesinan CNC dalam pembelajaran simulasi CNC proses permesinan cnc dalam pembelajaran simulasi CNC,” Jurnal Edukasi Elektro, vol. 7, no. 8, pp. 1–18, 2012.
[12] B. Burhanudin, E. Suryono, A. Prasetyo, B. Margono, Z. Zainuddin, and A. Rahmatulloh, “pengembangan pola pembelajaran pemograman CNC melalui integrasi G Code, simulator CNC dan CAM,” Abdi Masya, vol. 4, no. 2, pp. 219–224, 2023.
[13] Ahmad Chandra Aditiya, Mochamad Arif Irfa’I, Fajar Satriya Hadi, and Basuki, “Pengaruh Spindle Speed Dan Feed Rate Terhadap Kekasaran Permukaan Al 6061,” Manufaktur, Otomasi, Otomotif, dan Energi Terbarukan, vol. 2, no. 1, pp. 18–25, 2023.
[14] R. M. Yusron, M. I. Mustajib, and I. Hanafi, “Optimization of aluminum 6061 surface integrity on dry-running machining CNC milling using Taguchi methods,” J. Energy, Mech. Mater. Manuf. Eng., vol. 8, no. 1, pp. 23–32, 2023.
[15] Hendra, Y. Saputra, Putri, Hernadewita, and Nasril, "Perbandingan pembuatan produk menggunakan simulasi program CNC dan CNC Milling," METAL: Jurnal Sistem Mekanik dan Termal, vol. 6, no. 1, pp. 53–59, 2022.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Jurnal Media Teknik dan Sistem Industri
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
