ANALISIS DAYA SERAP DAN DAYA TEKAN BATAKO PRES, TERHADAP INTERAKSI FAKTOR PEKERJA, FAKTOR KOMPOSISI AIR, DAN FAKTOR KOMPOSISI KAPUR-PASIR
DOI:
https://doi.org/10.35194/jmtsi.v2i1.276Abstrak
Abstract— The need for building materials in recent decades has increased. One of them is the need of "Prescription Batako". This can happen along with the increasing of infrastructure development in society. As a result, the challenge of reaching market demand is also greater. This condition demands each Preservation Batako company to provide maximum product Quality. The purpose of this research is to know what factors affect the results of Prescription Batako products. The method used is a Design Experiment using Factorial Factor Three Factor. The three factors are Worker factor, water composition factor, and with sand-lime composition factor. Data processing is assisted by SPSS software. Influence which is analyzed by three factors are absorption and compressive power. These three factors have a significant effect on absorption and compressive power.
Keywords— Design Experiment; Factorial Three Factor
Kata kunci : Design Experiment, Faktorial Tiga Faktor
Referensi
[2] Prastito, A. (2004). Cara Mudah Mengatasi Masalah Statistik & Rancangan Percobaan. Jakarta : PT. Elex Media Komputindo.
[3] Cochran, W. (1992). Experimental Design. Dalam Jurnal Rekayasa dan Manajemen Sistem
Industri Vol 1 No 1 2013. FT : Universitas Braijaya.
[4] Prasetya, C. Rahman, A & Efrote, R. (2010). Analisa Desain Eksperimen Pembuatan Batako Berbahan Alternatif Lumpur Lapindo Dan Fly Ash Dengan Metoda Taguchi.
[5] Wawolumaja, R. (2012). Penerapan Taguchi Parameter Design. Dalam Jurnal Rudy Wawolumaja dan Ridani Faurika Penentuan Level Faktor Produksi Batako untuk Memaksimumkan Kekuatan Tekan. FT: Universitas Kristen Maranatha.
[6] Zainal, A. (2010). Penelitian korelasional [Online]. http//www/.muhammad-Zainal--Abidin/penelitian-korelasi/personal-blog.html. Diakses tanggal 25 Januari 2017
